IEEE University of Toronto Student Branch

Location: Bahen Centre for Information Technology, Room BA1240

Speaker

Dr.Francis Dawson

Agenda

Refreshments: 6:00-6:30 pm
Presentation: 6:30-8:00 pm

Contact Ehsan Behboudi,

Organizer IEEE Aerospace Electronics System Chapter (AESS)

Abstract

A large number of converters utilized in industrial and utility applications must be synchronized to the grid. For power quality applications, the accuracy of spectral components calculated using the discrete Fourier transform is improved using synchronized sampling. Synchronization or synchronized sampling applications inherently require a phase locked loop. The conventional phase locked loop is constrained by a trade-off between phase tracking performance and noise immunity. Moreover, most of the phase locked loops have a limited frequency tracking range which is not an issue in utility applications but is of great concern in some aerospace applications where the frequency of the bus can vary anywhere from 360 Hz to approximately 800 Hz in less than a second. This presentation gives a brief review of the state-of-the art for phase locked loops followed by a brief description of a new phase locked loop concept that has the following performance capabilities; 100:1 dynamic voltage range; positive sequence fundamental component tracking in real time; frequency tracking response time of at most two cycles; no tradeoff between noise immunity and tracking performance; maximum frequency tracking slewrate of 10 Hz/s, operating frequency range of subHz to 1 KHz. The new phase lock loop has been designed using a VHDL tool and can be implemented in a field programmable gate array or with microprocessors.

Biography

Francis Dawson (S'86-M'87) received the B.Sc degree in physics and the B.ASc., M.A.Sc., and Ph.D degrees in electrical engineering from the University of Toronto in 1978, 1982, 1985, and 1988, respectively. He worked as a process control engineer in the pulp and paper, rubber and textile industries during the period 1978-1980. From 1982 to 1984 he acted as a consultant on various projects. Development areas included high- frequency link power supplies, power supplies for specialized applications and high current protection circuits. Since 1988 he has been with the Department of Electrical and Computer Engineering, University of Toronto where he is engaged in teaching and research. His areas of research interest include static power converters and their applications, signal processing in power engineering applications and device or process modeling. He has also participated as a Consultant or Project Leader in several industrial projects. Dr. Dawson is a member of the Association of Professional Engineers of Ontario.